Welcome to the next Generation of Concealed Fixing

TUF-S Fasteners are for the secure and easy attachment of HPL or fibre cement panels.

Concealed fastener solution and quick to install.

The SFS TUF-S fastening system.

Easy

no complex undercut hole required – simple standard hole sufficient
no special tools to install required
holes can even be drilled on site
quick and easy installation with the battery riveting tool from GESIPA® (e.g. PowerBird® Pro)

Safe

no overtorquing of the TUF-S
high pullout values with the installed thread
no unwinding
removable possible via hex head

50% Less Installation Time

The TUF-S blind fastener from SFS is superior to previous approaches to the attachment of HPL or fibre cement cladding panels with regards to installation and long-term security.
Installation is performed quickly and securely by one person, without the use of special tools. Installation time is also reduced by up to 50% when compared to conventional blind attachments.
The TUF-S blind fastener can be removed once if required.

1. Pre-drill using a Ø6 mm blind-hole drill with depth stop.

2. Position the pre-drilled hanger over the hole in the panel and push through the TUF-S blind fastener.

3. Remove the mandrel using a GESIPA® battery riveting tool combined with nose piece 17/36 or 17/40.

Optimum Security

In addition to an easy and timesaving installation, the TUF-S is a secure solution.
The fastener cannot be overdriven during installation. Due to its radial expansion
when the mandrel is removed, the partially cut thread becomes wedged in the panel material, generating very high pullout values.
Spontaneous slackening due to expansion or vibration is not possible. The sleeve is made of austenitic stainless steel (material DIN 1.4401, grade A4).
Our technical advisers will be pleased to provide you with detailed information. Just give us a call.